1966-68 Airstream Window Seal

This closed cell foam gasket can be used on the “frameless” 1966-68 Airstream windows and also on pre-1962 Serro Scotty windows. It is approximately 1/2″ wide and 1/4″ thick and has a strong adhesive backing for easy installation.

To install, thoroughly clean the aluminum surface before affixing the gasket. You may need to use mineral spirits and a Scotchbrite style pad to remove old adhesive. Then use alcohol on a clean cloth to get the surface entirely clean and free of petroleum residue. After sticking the gasket to the surface, close the window to clamp it in place while it sets. See the additional maintenance note below.

Price is for one 25-foot length.

If you need other parts for this window we sell many of them:

• VTS-868 Window Glass 
• VTS-469 1968 Glass Trim
• VTS-182 Glass Clip 
• VTS-093 Sill Latch 
• VTS-288 Window Side Operator
• VTS-631 Glass Bar Arm
• VTS-504 Fixed Window Interior Glazing 
• VTS-384 Screen Clips
• VTS-1019 Window Screen Spline 

Maintenance Note

Take a tip from your original owner’s manual and periodically wipe the window gasket with silicone spray to prevent it from sticking to the glass. The heat that builds up behind the glass from the sun’s radiation can slightly melt rubber window gaskets, especially at first while the rubber may still be off-gassing from the production process.